REBELLE ARCHITECTURAL LIGHTING | CYL-003 | REBELLELIGHTING.COM Available as a wall, ceiling, or pendant fixture, the CYL-003 family of luminaires has a rounded triangular profile and uses ceramic metal halide T6 lamps. Constructed in aluminum, a variety of powder paint finishes are available. The wall-mounted up/down luminaire (shown) features single lamp operation to provide both uplighting and down-lighting.

TCP | WET LOCATION FIXTURE | TCPI.COM This vapor-tight wet location fixture is applicable for parking garages, car washes, gas stations, subways, and industrial facilities. The fixture can operate with either one, two, or three fluorescent 32W T8 lamps or 54W T5 lamps. Serving as an energy-efficient alternative to metal halide and high-pressure sodium for commercial and industrial applications, this wet-location fixture has an IP65-rated enclosure to protect against dust and moisture.

ORBIT INDUSTRIES/UMI | HID SERIES | ORBITELECTRIC.COM For public areas where illumination and security are a concern, the HID series has more than 30 models available, including floodlights, ceiling mounts, and high bays. All models have lenses that are heat-and shock-resistant. The cast aluminum HID wall pack (shown) uses a 175W metal halide lamp.

ARCHITECTURAL AREA LIGHTING | EGRESS POST TOP ADAPTER | AAL.NET According to the manufacturer, this is the first accessory produced that can be integrated into an existing non-egress-fitted pole to provide required egress illumination. Available in two styles—traditional and contemporary—and 13 colors, each adapter adds approximately 3 inches to a pole's overall height. The adapter fits over 4-inch-diameter poles and features a low-voltage halogen lamp.

HIGHLITES | WEATHERGARD SERIES | HIGHLITESLIGHTING.COM The LED exit signs in this series feature a wraparound clear polycarbonate enclosure and are designed to withstand severe environments and areas where accidental damage or vandalism are a concern. Available in black, gray, white, or brushed finishes with matching canopies, a special high-intensity indirect red or green LED panel, depending on the model, provides long-lasting light in either wall, ceiling, end-or pendant-mount models.

ALLSCAPE | 3DOP SOFTWARE | ALLLIGHTING.COM This software, specifically designed for evaluating exterior lighting, allows users to perform lighting analyses that show how fixture positions affect light output and overlap. The software has six modes previously not available, including a thermal mode, photo mode, statistics mode, dark sky mode, multiple fixtures mode, and red, green, blue mode.

KIM LIGHTING | WARP9 | KIMLIGHTING.COM The slim design of WARP9 is well suited for building sites, roadways, and pedestrian zones. The luminaire “virtually disappears from the site,” according to the manufacturer, as it camouflages itself with its surroundings. Multiple lamp options are available, including pulse start metal halide, metal halide, high pressure sodium, and compact fluorescent.